How to deal with and avoid 3 phase voltage stabilizer display overvoltage
◴ 2024-08-28
When using a voltage stabilizer, some users may encounter malfunctions, such as the screen displaying overvoltage. For overvoltage display, different manufacturers have different ways to deal with it. Usually, you can disconnect the regulator power supply and wait for the voltage to return to the acceptable range of the regulator before restoring the power supply, or manually start the power supply switch.
3 phase voltage stabilizer display over-voltage reasons
No matter which manufacturer produces three-phase voltage stabilizer, no matter what type, the voltage stabilizer has a voltage stabilization range. The voltage stabilization range is the maximum and minimum voltage limit that the voltage can withstand under normal operating conditions. If the voltage exceeds this limit, it will lead to over-voltage phenomenon; and if the voltage is lower than this limit, there will be under-voltage phenomenon.
The 3 phase voltage stabilizer display overvoltage treatment method
When the 3 phase voltage stabilizer shows over-voltage, it may be because the selected voltage regulator’s voltage stabilization range is not enough. In the case of unstable voltage, we should know the maximum and minimum voltage values of the region where we are located in order to select the appropriate voltage regulator.
How to choose a 3 phase stabilizer
Before purchasing a 3 phase voltage stabilizer, you should know the minimum and maximum values of voltage in all areas to determine the fluctuation range of the regulator. When choosing a voltage regulator, it is recommended to choose a regulator with a wider range of voltage regulation than the actual voltage fluctuation range to avoid over-voltage or under-voltage.
EN 
ES 
FR 
PT 
IT 
RO 
RU 
JA 
NL 
DA 
PL 
EL 
HU 
SV 
FI 
CS 
TR 
AR